Installation and Usage Guide

Getting started with your Drinkrose waterless diffuser takes only a few minutes. Here is the simple routine we recommend.

First use

  1. Unbox the diffuser and place it on a stable, flat surface.
  2. Remove the hand-blown glass reservoir from the wooden base.
  3. Add pure essential oil. Keep the level above the base of the internal intake tube but below the printed "Max" line.
  4. Seat the glass reservoir back on the base until it sits flush and secure.

Power on

Choose cordless (USB-C rechargeable, up to about 8 hours) or plug in. Turn the dial to start. The unit runs in an automatic cycle — roughly three minutes of misting, then a five-minute pause — and shuts off by itself when the oil runs out.

Watch the video

Prefer to follow along visually? These short videos walk you through setup and deep cleaning.

Related reading

Back to blog